

Standard parts

Blades serious
Precision Grinding Tungsten Cemented Carbide Dies Cold Heading Die
Description of tungsten carbide die
1 continuous production of tungsten carbide die over 18 years
2 total production quantity of tungsten carbide die up to 800 tons
3 widely exported to Europe,America,Australia, Brazil, India, Russia etc
4 We, Mingri CARBIDE, promise you the 100% raw material.
5 We, Mingri CARBIDE, quotation your order with 24 hours
6 We, Mingri CARBIDE , accept your order as per your requirements
Grade | Density g/cm3 | Hardness HRA | T.R.S MPa | Performance&application recommended |
YG11 | 14.4 | 88.5 | 2420 | Forming or stamping dies for metal powders and nonmetal powders |
YG15 | 14 | 87 | 3000 | It is suitable for drawing steel tubes and rods under high compression ratio,manufacturing upsetting,punching and stamping tools under large stress |
YG20 | 13.5 | 85.5 | 2800 | It is suitable for manufacturing punching dies for watch parts,leaf spring of musical instrument,battery jars,small sized steel balls,screws,screw caps,etc |
YG16C | 13.9 | 85 | 2750 |
It is suitable for impact-resistant forging dies |
YG18C | 13.7 | 84 | 2800 |
It is suitable for impact-resistant forging dies,hot-forging dies and finishing rollers |
Other grades and sizes can be offered as per customers' requirements |
TYPE | some size of tungsten carbide fasteners die/mm | ||
d | D | L | |
BD0101015 | 10 | 1 | 15 |
BD0171230 | 12 | 1.7 | 30 |
BD0211015 | 10 | 2.1 | 15 |
BD0211230 | 12 | 2.1 | 30 |
BD0241015 | 10 | 2.4 | 15 |
BD0291425 | 14 | 2.9 | 35 |
BD0291640 | 16 | 2.9 | 40 |
... | ... | ... | ... |
Application of tungsten carbide die
1, tungsten carbide die use puching and stamping machine parts
2, tungsten carbide die use for drawing steel tubes and rods
3, tungsten carbide die ues for impact-resistant forging die, hot forging die and finished rollers
4, also use for nut wear resistant or impact resistant dies
5, use for nut forming die and high impact-resistant die
6, use for punching dies
Production Process of Tungsten Carbide Tool Die Insert for Forging Heading Trimming Stamping Pressing Moulds
To ensure the quality and the requirements of the drawings can be met before mass production
1st:, Start to prepare the RTP powder as per customer's requirement with our wet-grinding machine
2nd, Before mass production, do a trial pressing and sintering using mould,
3rd, Check the appearances and the sizes of the samples with micrometer, projectors etc.
Test process of Tungsten Carbide Tool Die Insert for Forging Heading Trimming Stamping Pressing Moulds
1st,Mass production press the raw materials to shape blanks,
Notes: all carbide dies blanks must be passed by semi finished inspection
2nd,Sinter blanks to finish (HIP) and finished products inspection,
Notes:10 sets of vacuum sintering furnace and 2set of HIP in the factory ensure the best quality and production capacity.
3rd,Cleaning/tumbling to make the carbide dies clean and nice surface.

Page rights reserved:Zhuzhou Mingri Cemented Carbide Co. IPv6 supported 湘ICP备10204182号-1 www.300.cn