Hotline：
0731-22878222
Standard parts
Blades serious
Long Lasting Time Tungsten Cemented Carbide Tablet Punching Die
Item name: Tungsten carbide dies
Grade:YG11,YG15,YG20,YG16C,YG18,YG20C,YG22C,YG25C,GT55
Specification:
Outer diameter: ø2- ø380mm, inner hole: ø 1- ø 360mm, Length/Height: 1-200mm,
Bolts & Nibs; Nut Forming Dies; Non-standard Dies
We also provide OEM size and customized.
Grades of Tungsten Carbide Tool Die Insert for Forging Heading Trimming Stamping Pressing Moulds
|
Grade |
|
|
|
Properties & Applications |
Approx Grades in China |
|
Density |
T.R.S |
Hardness |
|||
|
g/cm3 |
MPα |
HRA |
|||
|
YM11 |
14.4 |
2420 |
88.5 |
Forming or stamping dies for metal powders and nonmetal powders |
YG11 |
|
YM15 |
14 |
3000 |
87.0 |
It is suitable for drawing steel tubes and rods under high compression ratio, manufacturing upsetting, punching and stamping tools under large stress. |
YG15 |
|
YM20 |
13.5 |
2800 |
85.5 |
It is suitable for manufacturing punching dies for watch parts, leaf spring of musical instruments, battery jars, small size steel balls, screws, screw caps, etc |
YG20 |
|
ML32 |
13.9 |
2750 |
85.0 |
It is suitable for impact-resistant forging dies |
YG16C |
|
ML35 |
13.7 |
2800 |
84.0 |
It is suitable for impact-resistant forging dies, hot-forging dies and finishing rollers |
YG18C |
|
ML40 |
13.5 |
2850 |
83.0 |
It is suitable for wear resistant or impact resistant dies |
YG20C |
|
ML50 |
13.3 |
2900 |
82.0 |
It is suitable for stainless screw dies and semi finishing rollers |
YG22C |
|
ML60 |
13.1 |
2950 |
81.5 |
It is suitable for screw cap forming dies with high strength ( highest impact-resistant forging dies.) |
YG25C |
Application of Tungsten Carbide Tool Die Insert for Forging Heading Trimming Stamping Pressing Moulds
Production Process of Tungsten Carbide Tool Die Insert for Forging Heading Trimming Stamping Pressing Moulds
To ensure the quality and the requirements of the drawings can be met before mass production
1st:, Start to prepare the RTP powder as per customer's requirement with our wet-grinding machine
2nd, Before mass production, do a trial pressing and sintering using mould,
3rd, Check the appearances and the sizes of the samples with micrometer, projectors etc.
Test process of Tungsten Carbide Tool Die Insert for Forging Heading Trimming Stamping Pressing Moulds
1st,Mass production press the raw materials to shape blanks,
Notes: all carbide dies blanks must be passed by semi finished inspection
2nd,Sinter blanks to finish (HIP) and finished products inspection,
Notes:10 sets of vacuum sintering furnace and 2set of HIP in the factory ensure the best quality and production capacity.
3rd,Cleaning/tumbling to make the carbide dies clean and nice surface.
Packing and Delivery of Tungsten Carbide Tool Die Insert for Forging Heading Trimming Stamping Pressing Moulds
|
Packing |
Paper+paper boxes+exported wooden cartons or paper cases. |
|
Shipping |
UPS,TNT,EMS,Fedex,DHL,or as you request. |
|
Delivery |
7-10 days after confirm all details. |
Enterprise certifications
As one of the most professional manufacturers of tungsten carbide products in China, Zhuzhou Ming Ri Cemented Carbide Co., Ltd supplies a wide variety of high quality products for customers
worldwide with management principle of "stable quality & reliable cooperation".
Page rights reserved：Zhuzhou Mingri Cemented Carbide Co. IPv6 supported 湘ICP备10204182号-1 www.300.cn