

Standard parts

Blades serious
OEM Tungsten carbide bars for machining cast iron,tungsten carbide flat bar
OEM Tungsten carbide bars for machining cast iron,tungsten carbide flat bar
Item | Tungsten carbide strip |
Grade | YG6, YG6A, YG8, YS2T, YL10.2, K10, K20, K30 ETC. |
Sizes | Length/Width: 5-330mm, Thickness: 1.5-66mm or customized. |
Brand | Rixin |
Country of Origin | Zhuzhou, China |
Usage | making knives, blade, cutter, scraper, drill bits, vsi crusher, Guide rail, moulds, wear parts etc. |
Tungsten Carbide Strip is used for cutting general wood cutters, hard wood cutters, plastic and tobacco, as well as to making drawing dies, wear parts and module core for punching parts and automatic press and etc.
OEM Tungsten carbide bars for machining cast iron,tungsten carbide flat bar
Grade |
Density |
T.R.S |
Hardness HRA |
Performance & application recommended |
YM6 |
14.9 |
2400 |
90.5 |
Good wear resistance, used for hard wood, used for processing original wood, aluminum section bar, brass rod and cast iron. |
YM6A |
14.85 |
2000 |
92.5 |
Wear resistance higher than YM6, used for processing hard wood, original wood, aluminum section bar, brass rod and cast iron. |
YM8 |
14.7 |
2800 |
89.8 |
High wear and impact resistance , suitable for machining dry wood, soft wood and non-ferrous metal section bar. |
YM2T |
14.25 |
2400 |
92 |
Fine grain alloy, with high wear resistance, bending strength, bonding resistance and thermal strength. It is suitable for machining refractory alloys, stainless steel, high manganese steel, etc. |
YS25 |
13.0 |
2200 |
91 |
Wear resistance and strength comparatively higher, suitable for machining cast iron, non-ferrous metal and non-metal materials. |
YM25 |
14.45 |
3000 |
91.8 |
Wear resistance and strength comparatively higher, suitable for processing cast iron, non-ferrous,metal and non-metallid materials. |
Other grades of strips may be offered according to customers' requirement. |
To ensure the quality and the requirements of the drawings can be met before mass production
1st:, Start to prepare the RTP powder as per customer's requirement with our wet-grinding machine
2nd, Before mass production, do a trial pressing and sintering using mould,
3rd, Check the appearances and the sizes of the samples with micrometer, projectors etc.
Test process of Tungsten Carbide Tool Die Insert for Forging Heading Trimming Stamping Pressing Moulds
1st,Mass production press the raw materials to shape blanks,
Notes: all carbide dies blanks must be passed by semi finished inspection
2nd,Sinter blanks to finish (HIP) and finished products inspection,
Notes:10 sets of vacuum sintering furnace and 2set of HIP in the factory ensure the best quality and production capacity.
3rd,Cleaning/tumbling to make the carbide dies clean and nice surface.

Page rights reserved:Zhuzhou Mingri Cemented Carbide Co. IPv6 supported 湘ICP备10204182号-1 www.300.cn