

Standard parts

Blades serious
Tungsten carbide plates
Dimensions: 10-200mm(length), 5-200mm(width), 2-50mm(thickness)
Features:
1. High wear resistance.
2. 5 Tons sell a month.
3. Various types available.
4. ISO9001:2008,CQC.
5.Supply weld on cemented carbide parts
6.18 tons output a month
Application of tungsten carbide/TC insert plate
1.Machining cutting tools for trimming use.
2.For mould making, such as stamping mould, electronic mold
3.For high hardness components making.
Customized designs are welcome.
Recommend grade list of tungsten carbide strips and plates:
Grade | Density g/cm3 | Hardnes HRA | T.R.S Mpa | Performance&application recommended |
YG6A | 14.85 | 92.5 | 2000 | Fine grain alloy,good wear resistance.it is suitable for manufacturing forming cutter,wear-resistant parts etc. |
YG8 | 14.7 | 89.8 | 2800 | High bending strength,wear resistance lower than YG6A, suitable for manufacturing cutter ,wear-resistant parts etc. |
YG11 | 14.4 | 88.5 | 2900 | High bending strength,wear resistance lower than YG6A, suitable for manufacturing cutter ,wear-resistant parts etc. |
YG15 | 14.0 | 87.0 | 3000 | Suitable for manufacturing punching dies, wear-resistant parts. |
YG20 | 13.5 | 85.5 | 2800 | High bending strength,suitable for manufacturing progressive dies and other punching dies. |
YG25 | 13.1 | 81.5 | 2950 | High bending strength,wear resistance lower than YM6A, suitable for manufacturing cutter ,wear-resistant parts etc. |
YS2T | 14.25 | 92.0 | 2500 | Fine grain alloy, with high wear resistance, bending strength, bonding resistance and thermal strength. it is suitable for machining refractory alloys,stainless steel, high manganese steel, etc. |
Product size reference:
Type (L×W ) | Thickness (H) | Tolerance | ||
Length (L) | Width (W) | Height (H) | ||
50×50× | 1.5~10 | L×±1.5% | W×±2.5% | H×±2.5% |
100×100× | 2.5~60 | |||
120×120× | ||||
150×150× | ||||
200×200× | ||||
300×200× |
*Other grades and sizes can be offered as per customers' requirements
To ensure the quality and the requirements of the drawings can be met before mass production
1st:, Start to prepare the RTP powder as per customer's requirement with our wet-grinding machine
2nd, Before mass production, do a trial pressing and sintering using mould,
3rd, Check the appearances and the sizes of the samples with micrometer, projectors etc.
Test process of High density hard alloy wear resistant cemented tungsten carbide plates
1st,Mass production,press the raw materials to shape blanks,
Notes: all carbide plates blanks must be passed by semi finished inspection
2nd,Sinter blanks to finish (HIP) and finished products inspection,
Notes:10 sets of vacuum sintering furnace and 2set of HIP in the factory ensure the best quality and production capacity.
3rd,Cleaning/tumbling to make the carbide plate clean and nice surface
Packing and Delivery of High density hard alloy wear resistant cemented tungsten carbide plates
step 1, wrapped carbide plate in paper to avoid carbide plate be broken
step 2, put the carbide plate in inner small carton box
step 3, put the inner box into outer carton and fill the carton with foamed plastic
step 4, wrap the carton with packaging tape

Page rights reserved:Zhuzhou Mingri Cemented Carbide Co. IPv6 supported 湘ICP备10204182号-1 www.300.cn