

Standard parts

Blades serious
manufacturer high quality ML100 cemented carbide products tooling dies for fastener industry
1, Zhuzhou Mingri has the richest molds stock of tungsten carbide moulds from Zhuzhou manufacturer
2, 19 years of stable relationship with our customers
3, The most advanced tooling house
4, The largest production capacity and fastest delivery
5, The most reliable testing machines for all specifications
6, The best and reliable after service
Grade |
Density g/cm3 |
Hardness HRA |
T.R.S Mpa |
Performance&application recommended |
YG20 |
13.5 |
85.5 |
2800 |
It is suitable for manufacturing punching dies for watch parts,leaf spring of musical instrument,battery jars,small sized steel balls,screws,screw caps,etc |
YG18C |
13.7 |
84 |
2800 |
It is suitable for impact-resistant forging dies,hot-forging dies and finishing rollers |
YG20C |
13.5 |
83 |
2850 |
It is suitable for wear resistant or impact resistant dies |
YG22C |
13.3 |
82 |
2900 |
It is suitable for nut forming dies and high impact-resistant dies |
YG25C |
13.1 |
81.5 |
2950 |
It is suitable for stainless screw dies and semifinishing rollers |
Other grades and sizes can be offered as per customers' requirement |
Dimension
TYPE | some size of tungsten carbide fasteners die/mm | ||
d | D | L | |
BD0101015 | 10 | 1 | 15 |
BD0171230 | 12 | 1.7 | 30 |
BD0211015 | 10 | 2.1 | 15 |
BD0211230 | 12 | 2.1 | 30 |
BD0241015 | 10 | 2.4 | 15 |
BD0291425 | 14 | 2.9 | 35 |
BD0291640 | 16 | 2.9 | 40 |
... | ... | ... | .. |
Grade | Performance & application recommended | ||||||||||
Density | T.R.S | Hardness | |||||||||
g/cm3 | MPα | HRA | |||||||||
A | 13.5 | 3000 | 83.5 | Good wea ristance and high bending strength. Primariy for nut forming dies and high impact resistance forging dies. | |||||||
YM11 | 14.4 | 2420 | 88.5 | Forming or stamping dies for metal powders and nonmetal powders. | |||||||
YM15 | 14.0 | 2500 | 87.5 |
For fabricating drawing dies of stain tubes and rods under High compressibility ratio;punching, stamping ,froging tools under large stress. |
|||||||
YM20 | 13.5 | 2800 | 85.5 |
For fabricating of stamping dies for watch parts, spring plates of musical instruments, batters jars, small sized steel balls, screws, screw caps. |
|||||||
ML32 | 13.9 | 2750 | 85.5 | Impact resistance forging dies | |||||||
ML35 | 13.7 | 2800 | 84.5 | Impact resistance forging dies, hot-press forging dies and rollers. | |||||||
ML40 | 13.5 | 2850 | 83.5 | Dies for resistant or impact resistant application. | |||||||
ML50 | 13.3 | 2900 | 83.0 | Nut forming dies and high impact resistance forging dies. | |||||||
ML60 | 13.1 | 2950 | 82.5 | Stainless bolt header dies and rollers. | |||||||
ML90 | 13.3 | 3200 | 82.0 | Screw cap forming dies with high impact resistance ( Highest impact resistance forging dies). | |||||||
Other grades may be offered by customers' requirements |
To ensure the quality and the requirements of the drawings can be met before mass production
1st:, Start to prepare the RTP powder as per customer's requirement with our wet-grinding machine
2nd, Before mass production, do a trial pressing and sintering using mould,
3rd, Check the appearances and the sizes of the samples with micrometer, projectors etc.
Test process of High density hard alloy wear resistant cemented tungsten carbide plates
1st,Mass production,press the raw materials to shape blanks,
Notes: all carbide plates blanks must be passed by semi finished inspection
2nd,Sinter blanks to finish (HIP) and finished products inspection,
Notes:10 sets of vacuum sintering furnace and 2set of HIP in the factory ensure the best quality and production capacity.
3rd,Cleaning/tumbling to make the carbide plate clean and nice surface

Page rights reserved:Zhuzhou Mingri Cemented Carbide Co. IPv6 supported 湘ICP备10204182号-1 www.300.cn