Hello!Welcome to Zhuzhou Mingri Cemented Carbide Co., Ltd.!

搜索
Search

Hotline:
0731-22878222

这是描述信息
imgboxbg

Standard parts

All categories
imgboxbg

Blades serious

All categories
All categories
Your present location:
Homepage
/
/
/
/
/
Y20 Yg22 Yg25 High Precision Tungsten Carbide Cold Heading Dies
1/1

Y20 Yg22 Yg25 High Precision Tungsten Carbide Cold Heading Dies

Product serial number
carbide dies-04
Category
Heading die
Quantity
-
+
1
description

for Oil-Field Drill Bits Polished Cemented Tungsten Carbide Button Teeth Tips

Grade Density g/cm3 Hardness HRA T.R.S MPa Performance&application recommended
YG11 14.4 88.5 2420 Forming or stamping dies for metal powders and nonmetal powders
YG15 14 87 3000 It is suitable for drawing steel tubes and rods under high compression ratio,manufacturing upsetting,punching and stamping tools under large stress
YG20 13.5 85.5 2800 It is suitable for manufacturing punching dies for watch parts,leaf spring of musical instrument,battery jars,small sized steel balls,screws,screw caps,etc
YG16C 13.9 85 2750
It is suitable for impact-resistant forging dies
 
YG18C 13.7 84 2800

It is suitable for impact-resistant forging dies,hot-forging dies and finishing rollers

Other grades and sizes can be offered as per customers' requirements 


Wearable Fastener Mould Tungsten Carbide Polish Nut Forging Dies

TYPE some size of tungsten carbide fasteners die/mm
d D L
BD0101015 10 1 15
BD0171230 12 1.7 30
BD0211015 10 2.1 15
BD0211230 12 2.1 30
BD0241015 10 2.4 15
BD0291425 14 2.9 35
BD0291640 16 2.9 40
... ... ... ...

To ensure the quality and the requirements of the drawings can be met before mass production
1st:, Start to prepare the RTP powder as per customer's requirement with our wet-grinding machine
2nd, Before mass production, do a trial pressing and sintering using mould,

3rd, Check the appearances and the sizes of the samples with micrometer, projectors etc. 
High Quality Tungsten Carbide K15 Carbide Plate/Tungsten Carbide Sheet Blanks
 

Test process of High density hard alloy wear resistant cemented tungsten carbide plates

1st,Mass production,press the raw materials to shape blanks,

Notes: all carbide plates blanks must be passed by semi finished inspection 


2nd,Sinter blanks to finish (HIP) and finished products inspection,

Notes:10 sets of vacuum sintering furnace and 2set of HIP in the factory ensure the best quality and production capacity.

 

3rd,Cleaning/tumbling to make the carbide plate clean and nice surface
High Quality Tungsten Carbide K15 Carbide Plate/Tungsten Carbide Sheet Blanks

Tungsten Carbide Plates and Strips for Cutting Tools
Tungsten Carbide Plates and Strips for Cutting Tools

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Page rights reserved:Zhuzhou Mingri Cemented Carbide Co.  IPv6 supported  湘ICP备10204182号-1  www.300.cn