Hello!Welcome to Zhuzhou Mingri Cemented Carbide Co., Ltd.!

搜索
Search

Hotline:
0731-22878222

这是描述信息
imgboxbg

Standard parts

All categories
imgboxbg

Blades serious

All categories
All categories
Your present location:
Homepage
/
/
/
/
/
tungsten carbide cold forging dies strips boards, tungsten carbide dies
1/1
Number of views:
1002

tungsten carbide cold forging dies strips boards, tungsten carbide dies

Number of views:
1002
Product serial number
carbide dies-01
Category
Heading die
Quantity
-
+
1
description

 公司图片

车间

Grades of tungsten carbide dies

Grade

Density g/cm3

Hardness HRA

T.R.S Mpα

Performance&application recommended

YG11

14.4

88.5

2420

 Forming or stamping dies for metal powders and nonmetal powders

YG15

14.0

87

3000

 It is suitable for drawing steel tubes and rods under high compression ratio,manufacturing upsetting,punching and stamping tools under large stress

YG20

13.5

85.5

2800

 It is suitable for manufacturing punching dies for watch parts,leaf spring of musical instrument,battery jars,small sized steel balls,screws,screw caps,etc

YG16C

13.9

85

2750

 It is suitable for impact-resistant forging dies

YG18C

13.7

84

2800

 It is suitable for impact-resistant forging dies,hot-forging dies and finishing rollers

YG20C

13.5

83

2850

 It is suitable for wear resistant or impact resistant dies

YG22C

13.3

82

2900

 It is suitable for nut forming dies and high impact-resistant dies

YG25C

13.1

81.5

2950

 It is suitable for stainless screw dies and semifinishing rollers

Other grades and sizes can be offered as per customers' requirement

To ensure the quality and the requirements of the drawings can be met before mass production
1st:, Start to prepare the RTP powder as per customer's requirement with our wet-grinding machine
2nd, Before mass production, do a trial pressing and sintering using mould,

3rd, Check the appearances and the sizes of the samples with micrometer, projectors etc. 

Test process of Hard Alloy Carbide Roller Press HPGR Studs Pin for Crushing Iron Ore

1st,Mass production, press the raw materials to shape blanks,
Notes: all carbide stud pins blanks must be passed by semi finished inspection 

2nd,Sinter blanks to finish (HIP) and finished products inspection,
Notes:10 sets of vacuum sintering furnace and 2set of HIP in the factory ensure the best quality and production capacity.
 
3rd,Cleaning/tumbling to make the carbide stud pins clean and nice surface.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Page rights reserved:Zhuzhou Mingri Cemented Carbide Co.  IPv6 supported  湘ICP备10204182号-1  www.300.cn